CJC Sensor
Model AC1361 temperature sensor provides
cold junction temperature measurement for thermocouple
applications on user-designed backplanes or mounting
boards. These SIP temperature sensors are provided on
each channel of all Analog Devices, Inc. backplanes and
mounting boards.
The minimum purchase quantity for the AC1361 is 50 pieces. |
Order
Now Model AC1361 |
|
back to top
|
Current Conversion Resistor
Model
AC1362 is a 20  ,
0.1% (typical), 1/8 watt, 20 ppm/°C replacement plug-in
resistor that is fully encapsulated. The AC1362 is supplied
with each 5B32 Current
Input Module. |
Order
Now Model AC1362 |
|
back to top
|
Single Channel Socket
A
single channel test socket with screw terminals and cold
junction compensation for module evaluation. DIN rail compatible. Model
AC1360. |
Order
Now Model AC1360 |
|
back to top
|
|
Rack Mount Kit
| Model AC1363 is
a single-piece metal chassis for mounting the 5B01, 5B02,
5B08 or 5B08-MUX backplanes in
a 19" rack, requiring 19" x 3.5" area. Additionally, the
encapsulated power supply, Model PWR-01,
as well as the AC1324 interface
card, may be mounted on the rear of the AC1363 using mounting
holes provided. |
Order
Now Model AC1363 |
|
|
Configuration Jumpers
| Model AC1344 contains
10 jumpers and are used to configure the 5B01, 5B02, 5B08
and 5B08-MUX backplanes |
Model AC1344 |
|
back
to top
|
Cables
| The AC1315 is
a 2' (60cm) 26-pin flat ribbon cable with two connectors.
Used with the AC1324 screw
terminal interface board, the AC1315 cable connects directly
to either the P1 or P2, 26-pin I/O system connector on the
5B Series backplanes. |
Order
Now Model AC1315 |
| The CAB-01 is
a 26-pin cable with 3 connectors used to daisy-chain 5B02
16-channel, or 5B08-MUX 8-channel mux backplanes.
The number of CAB-01 cables needed is equal to the number
of backplanes to be connected minus one. A maximum of four
backplanes can be chained together, requiring three CAB-01
cables and one AC1315 cable (or similar cable) to connect
to an interface board or control system. |
Order
Now Model CAB-01 |
|
back to top
|
|
Power Supplies and Power Cord
|
back to top
|
Interface Board
| Model AC1324 is
a universal interface board with a 26-pin I/O connector and
26 I/O screw terminals. The 26-pin connector accepts the
AC1315 or CAB-01 cables from a 5B Series 5B01, 5B02, 5B08
or 5B08-MUX backplane and
provides 26 screw terminals for interconnecting to any analog
I/O subsystem. This interface board might be used with programmable
controllers, for example. It can be mounted to the AC1363 rack-mount
kit or in a snap track. Standoffs are included with the AC1324
and should be used if it is mounted on the back of the AC1363
rack mount kit. |
Order
Now Model AC1324 |
|
back to top
|
5B Series User Manual
| Model AC1364 is
a complete reference manual providing detailed information
on setting up the 5B Series subsystem. |
Order
Now Model AC1364 |
|
|
