I/O Backplane Cables
Model
AC1394 is a 3-foot flat ribbon cable with two 25-pin
female connectors, to enable direct connection of any 7B
Series backplane to a data acquisition board. |
Order
Now Model AC1394 |
| |
The Model
AC1393 optional 6-inch flat ribbon adapter cable
includes a 25-pin female connector and a 26-pin male header
connector. This cable converts any 7B Series backplane 25-pin
I/O connector to the 26-pin cable connectors (see Model AC1315). |
Order
Now Model AC1393 |
| |
Model
AC1315 is a 2-foot flat ribbon cable with two 26-pin
female connectors. Used with the optional AC1324 screw
terminal interface board, the AC1315 cable connects the AC1324 26-pin
connector to the AC1393 adapter
cable, which in turn, connects directly to the I/O system
connector supplied on the 7B Series backplane. |
Order
Now Model AC1315 |
|
back to top
|
User Manual
| The optional Model AC1399 is
a complete reference manual providing detailed information
on setting up the 7B Series subsystem. Complete specifications
and schematic diagrams are provided for each of the backplanes,
as well as a listing of backplane components and their vendors,
who must be contacted to secure additional parts when designers
engineer a user-specific backplane. The 7B Series User Manual
must be ordered as a separate item. |
Order
Now Model AC1399 |
|
back to top
|
Current Conversion Resistor
The Model AC1391 encapsulated,
plug-on, 250  ,
0.1%, 1/8 watt, 10 ppm/°C resistor converts current to
voltage when using the Model 7B33 input
module to measure process current. The AC1391 can be mounted
directly on the 7B Series backplanes. The AC1391 is not required
when using Model 7B32 to
measure process current. |
Order
Now Model AC1391 |
|
back to top
|
Interface Board for Analog I/O
| The Model AC1324 2.3-inch
x 3.7-inch optional universal interface board includes a 26-pin
I/O connector and 26 I/O screw terminals. The 26-pin AC1324
connector accepts the AC1315 cable
directly. With the AC1393 adapter
cable, it connects to a 7B Series Model 7BP04-1, 7BP08-1, or
7BP16-1 backplane,
providing screw terminals for inter- connecting to controller.
The AC1324 interface board can be mounted either at the back
of the AC1363 rack-mount
kit (standoffs are included and should be used) or in a snap
track. |
Order
Now Model AC1324 |
|
back to top
|
Kit for User-designed Modules
| The optional Model AC1397 kit
contains an individual empty 7B module case and hold-down screw
to enable the construction of a user-designed 7B-type module. |
Order
Now Model AC1397 |
|
back to top
|
Mounting Kits - Rack-Mount
| The Model AC1363 optional
rack-mount kit enables any Model 7BP04-1, 7BP08-1 or 7BP16-1 backplane to
be fitted into a 19-inch rack, requiring a 19-inch x 3.5-inch
area. Threaded inserts are provided for mounting any of the
three backplanes using four screws. Mounting hardware is provided
with the AC1363. |
Order
Now Model AC1363 |
|
|
|
